Specifications
General | ||||
---|---|---|---|---|
Frequency range (unit: MHz) Tx Rx | 144-148, 420-450*1 136-174, 400-479*1 *1guaranteed 144-148 MHz, 440-450 MHz | |||
Type of emissions | F2D/F3E (FM) | |||
Number of memory ch. | 302 (incl. 50 scan edges and 2 call) | |||
Antenna impedance | 50 Ω (SMA) | |||
Power supply External DC power Battery cells | 7.2V DC (with BP-264) 10-16V DC 6-10V DC | |||
Frequency stability | ±2.5 ppm -20°C to +60°C basis of 25°C | |||
Current drain (at 7.2V DC or 13.5V DC) (VHF/UHF, typical) |
| |||
Operating temperature range | -20°C to +60°C -4°F to +140°F | |||
Dimensions (projections not included) | 58(W) × 111(H) × 30(D) mm 29⁄32(W) × 43⁄8(H) × 13⁄16(D) in | |||
Weight | 380g; 13.4oz (with BP-264 and Ant.) |
Transmitter | |
---|---|
Output power (at 7.2 V DC) | 5.0W/2.5W/0.5W (high/mid/low) |
Spurious emissions | Less than -60 dBc (high/mid) Less than -13dBm (low) |
Max. freq. deviation | ±5 kHz/±2.5 kHz (wide/narrow) |
Ext. MIC connector | 3-conductor 2.5(d) mm (1⁄10″)/2.2kΩ |
Receiver | |
---|---|
Sensitivity (at 12dB SINAD) | 0.18 µV (guaranteed range) |
Squelch sensitivity (at threshold) | 0.18 µV typical |
Selectivity FM FM narrow | More than 60dB Less than 60dB |
Spurious and Image rejection ratio | More than 60dB (VHF) |
Audio output power (at 10% distortion) | More than 700mW (internal SP, 16Ω More than 400mQ (external SP, 8Ω |
Ext. SP connector | 3-connector 3.5 (d) mm (1⁄8″)/8Ω |
Applicable U.S. Military Specifications and IP Rating
Standard
| MIL 810F | |
Method | Proc. | |
Temp. Shock | 503.4 | I |
Rain | 506.4 | I, III |
Vibration | 514.4 | I |
Shock | 516.5 | I, IV |
Also meets equivalent MIL-STD-810-C, -D and -E. Other test categories are now under evaluation.
Ingress Protection Standard | |
Dust and Water | IP54 (dust-protection and water resistant) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Antenna, FA-S270C
- Belt clip, MB-124
- Battery pack, BP-265
- Wall charger, BC-167S*
- Hand strap
Options
- BP-263 BATTERY CASE
Battery case for AA (LR6) × 6 alkaline cells. - BP-264 BATTERY PACK
7.2V/1400mAh Ni-MH. Provides 10-11.5 hours operating time (approx.). - BP-265 BATTERY PACK
7.4V/1900mAh (min), 2000mAh (typ.). Provides 13.5-16 hours operating time (approx.). - BC-192 DESKTOP REGULAR CHARGER + BC-147S AC ADAPTER
Charges to BP-264 in 2 hours (approx.). - BC-191 DESKTOP RAPID CHARGER + BC-123S AC ADAPTER
Charges the BP-264 in 2 hours (approx.). - BC-193 DESKTOP RAPID CHARGER for BP-265 + BC-123S AC ADAPTER
Charges the BP-265 in 2.5 hours (approx.). BC-123SA/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC. - MB-130 VEHICLE CHARGER BRACKET
Bracket firmly holds a single rapid charger to allow battery charging while in a vehicle. The first image depicts the standalone MB130. The two subsequent images portray the bracket holding two different radios / charging cups.
Items required:
1. Charger - BC-160, BC-190, BC-19, BC-192 or BC-1932
2. Bracket - MB-130
3. Power - CP-17L - CP-19R CIGARETTE LIGHTER CABLE
Cigarette lighter cable for external power operation. DC-DC converter built-in. - CP-12/L* CIGARETTE LIGHTER CABLE
Cigarette lighter cable with noise filter for external power operation.
*The BP-265 cannot be charged using the external DC power jack. - CP-23L CIGARETTE LIGHTER CABLE
Cigarette lighter cable for use with the BC-191 or BC-193. - OPC-254/L* DC POWER CABLE
DC power cable for external power operation.
*The BP-265 cannot be charged using the external DC power jack. - OPC-515L DC POWER CABLE
DC power cable for use with the BC-191, BC-192 or BC-193. - HM-153 SPEAKER-MICROPHONE
Durable earphone-microphone. - HM-131 COMPACT SPEAKER-MICROPHONE
Compact and durable body with a revolving clip. - SP-27 EARPHONE
Acoustic tube earphone with clothing clip. - HS-94 HEADSET
Earhook headset with flexible boom microphone. - HS-95 HEADSET
Behind-the-head headset flexible boom microphone. - HS-97 HEADSET
Throat microphone that fits around your neck and picks up speech vibrations. - OPC-2006 PLUG ADAPTER CABLE
Required when using any of these headsets. - BC-167S* WALL CHARGER for BP-264
Charges the BP-264 in 8 hours (approx.). Same as supplied with some versions.
*BC-167SA for 120V AC. SE for 230V AC. SV for 240V AC. - CS-T70 CLONING SOFTWARE + OPC-478/UC CLONING CABLE
Provides quick and easy programming of memory channels, memory names. OPC-478UC is a USB cable type. - LC-174 CARRYING CASE
Helps protect the transceiver from scratches, etc. - FA-S270C VHF/UHF ANTENNA
Same as supplied. - MB-124 BELT CLIP
Alligator type clip. Same as supplied. - AD-92SMA ANTENNA CONNECTOR ADAPTER
Allows you to connect a BNC-type antenna. - OPC-474 CLONING CABLE
Used for receiver-to-receiver data cloning.