Specifications
| General | |||
|---|---|---|---|
| Frequency Coverage Tx Rx Weather |
| ||
| Mode WX | AM (6K00A3E) FM (16K0G3E) | ||
| Channel spacing | 25 kHz | ||
| No. of memory channels | 200 (20 Channels X 10 banks) | ||
| Power supply requirement | 7.4/7.2V DC (Battery pack) 11.0V DC (External DC jack) | ||
| Current drain (at 7.2 V DC)
Tx
Rx Max. audioRx Stand-by | 1.5 A typical 300 mA typical 70 mA typical | ||
| Frequency stability | ±5 ppm | ||
| Operating Temperature Range | -10°C to +60°C; -14°F to +140°F | ||
| Dimensions (W×H×D) (projections not included) | 54(W) x 129.3(H) x 35.5(D) mm; 21/8(W) ×53/32(H) × 113/32(D) in | ||
| Weight | 430 g; 15.2 oz (with antenna and BP-210N) | ||
| Antenna connector | 50Ω BNC type | ||
| Transmitter | |
|---|---|
| Output power (at 7.2 V DC) | 5.0 W typ. (PEP) 1.5 W typ. (CW) |
| Modulation system | Low level modulation |
| Modulation limiting | 70-100% |
| AF harmonic distortion | Less than 10% (at 60% mod.) |
| Hum and noise ratio | More than 35 dB |
| Spurious emissions | More than 46dB (Except operating freq. ±62.5 kHz point) |
| Microphone impedance | 3-conductor 2.5 (d) mm (1/10″) / more than 100kΩ |
| Receiver | |
|---|---|
| Intermediate frequency 1st 2nd | 30.05 MHz 450 kHz |
| Sensitivity (typ) VOR (AM 6dB S/N) COM (AM 6dB S/N) WX (FM 12dB SINAD) | Less than 0.71 µV Less than 0.5 µV Less than 0.22 µV |
| Selectivity | More than 7.5 kHz/-6 dB Less than 25 kHz/-60 dB |
| Hum and noise ratio | More than 40 dB |
| Spurious response AM FM | More than 60 dB More than 30 dB |
| Audio output power | More than 500mW typ. with an 8Ω load, 30% modulation |
| Ext. speaker connector | 3-conductor 3.5 (d) mm, (1⁄8″) / 8Ω |
All specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery pack, BP-210N or battery case, BP-208N*
- Belt clip, MB-103
- Carrying case, LC-159*
- Wall charger, BC-110AR/DR*
- Headset adapter, OPC-499*
- Antenna, FA-B02AR
- Handstrap
Options
- BP-208N BATTERY CASE
6 × AA (LR6) alkaline cells. - BP-209N BATTERY PACK
Ni-Cd: 7.2V/1100mAh - BP-210N BATTERY PACK
Ni-MH: 7.2V/1650mAh - BC-110AR/DR WALL CHARGER
Used for regular charging of the connected battery pack.
Same as supplied depending on version. - BC-119N DESKTOP CHARGER + BC-145 AC ADAPTER
+ AD-101 CHARGER ADAPTER + OPC-515L DC POWER CABLE
For rapid charging of battery pack, BP-209N, BP-210N orBP-211N. The BC-145 is supplied with the charger depending on version. Charging time: 1.5 to 2 hours. - BC-121N MULTI-CHARGER + BC-157 AC ADAPTER
+ AD-101 CHARGER ADAPTER (6 pieces)
For rapid charging of up to 6 batteries simultaneously. Six AD-101s are required. Charging time: 1 to 1.5 hours. - BC-144N DESKTOP CHARGER + BC-145 AC ADAPTER
For rapid charging of battery pack, BP-209N or BP-210N. The BC-145 is supplied with the charger depending on version. Charging time: 1.5 to 2 hours. - HM-173 SPEAKER MICROPHONE
Handheld microphone for the IC-A6 and the IC-A24. There is a swiveling alligator clip on back of speaker/microphone. - CP-20 CIGARETTE LIGHTER CABLE WITH DC-DC CONVERTER
For operation and charging with a 12V/24V cigarette lighter socket. - OPC-656 DC POWER CABLE
For using the BC-121N with a DC power supply. (12–20 V DC required). - MB-103 BELT CLIP
Alligator type. Same as supplied. - MB-86 SWIVEL BELT CLIP
A fast and easy way to remove the radio from your belt. - MB-96N SWIVEL LEATHER BELT HANGER
Swivel joint of the MB-86 is supplied. - MB-96F LEATHER BELT HANGER
Fixed type leather belt hanger. Use with MB-103. - LC-159 CARRYING CASE
- OPC-499 HEADSET ADAPTER CABLE
Works with most aviation headsets. Provides side tone function. Same as supplied with some versions. - FA-B02AR ANTENNA
Same as supplied. - PTT SW PUSH TO TALK SWITCH
Allows remote push-to-talk operation for the radio. Mounts to the control yoke or stick with a hook and loop strap.
